Nitro fuel is the blood pump of all the nitro-powered RC cars, planes, and boats out there in the market today. This is a particular blend, which fuels the powerful engines of such models, and the speed and thrill, sought by most aficionados. To any enthusiast, the power source behind these nitro-powered vehicles, this fuel, requires. Understanding in terms of composition, handling and use. This article is a complete review of nitro fuel. It contains all information about it from the constituent to the instructions of maintaining it.
What is Nitro Fuel?
Manufacturers produce nitro fuel, also commonly referred to as glow fuel, by combining methanol, nitromethane, and oil. Each component plays a specific role in ensuring optimal engine performance:
Methanol: The main type of fuel that feeds into the engine for it to produce the required power output.
Nitromethane: Improves on the combustion process hence giving an extra boost in power and speed.
Oil: It is used to counteract the friction and also to cool the engine in the process thus limiting the number of times it will require repairs due to wear and tear.
Nitro Fuel Mixtures
Manufacturers offer nitro fuel in different blends, customarily measuring it by the percentage of nitromethane it contains. These include ten percent nitro or 10% nitro, twenty percent nitro or 20% nitro and thirty percent nitro or 30% nitro. The percentage that you can choose depends with the type of the engine that your car. As well as the performance level you require. Higher nitro content offers more power however it has negative effects. Such as increased wear of the engines and high consumption of fuel.
To sum up, selection of proper nitro fuel.
Of particular importance is the choice of the nitro fuel that one is going to use on the RC vehicle for optimum performance and durability of the engine. Here are some considerations:
Engine Specifications: The specific amount of nitro that you should use should always be got from the manual of your particular engine. There is always potential to harm the engine, in case the mixture used contains a high percentage of nitro.
Type of RC Vehicle: Depending on the RC model to plan, the amount of fuel that is needed to make the plan set/power plan could vary. For example RC cars may require a 20 to 30% nitro content. While planes may need a lesser percentage of nitro content.
Usage and Environment: These blends are perfect for racing or any other high performance activities; The nitro blends are of a higher proportion. For general use some of the products that may be available in the market may contain a low nitro content.
Nitro fuel on Handling and Store
Unfortunately the furitek is flammable and should be used with much precaution. Here are some safety tips:Here are some safety tips:
Storage: Nitro fuel should be stored and preferably kept in a cool and dry area and should not be exposed to direct sunlight and heat. One should always store it in a closed vessel to prevent it from turning into gas.
Handling: There is a fuel bottle or pump which is available to transfer nitro fuel to your RC vehicle. Do not apply it in areas that can easily come in contact with the skin and the eyes as it can have some causing irritation.
Disposal: Nitro fuel should never be poured into the drain or into any environment since they are hazardous to human and animal health. If in doubt, consult the local waste management services for the right way to dispose these wastes.
Maintaining Your Nitro Engine
Proper maintenance of your nitro engine is crucial for performance and longevity:
After-Run Oil: When your RC vehicle is turned off always make sure that you put a few drops of after-run oil into the engine so as to avoid corrosion of the internal parts.
Cleaning: Some of the maintenance tasks that should be done include; Cleaning the air filter and the exterior of the engine in order to eliminate dirt that may hinder the performance of a vehicle.
Tuning: Make overhaul of your engine often to check for exhaust performances. This involves a tuning of carburetor with a view of achieving the right mixture of fuel and air.
Conclusion
As we have seen nitro fuel is a crucial activity in nitro RC’s. Since it is a source of power and the ability that makes Nitro RC’s fun to drive. If the enthusiasts in RC hobby are to understand the chemical composition of nitro fuel. How to handle and use it appropriately, they will be in a position. To ensure their models achieve the intended features of performance and safety. To have the most fun with your nitro-powered RC car. You should always follow rules of safe operation and adhere to the manufacturers instructions.
