The care you take with the newly installed glass after getting a windshield replacement will determine how long the window lasts. It is more likely to get damaged in the first 24 to 48 hours after you leave the auto glass repair shop. There are a few things you need to do to make sure the glass sets and adheres to the vehicle’s frame correctly after windshield replacement Sand Springs.
1 . Be cautious when driving.
The seal surrounding your windshield is still drying out even an hour after the restoration has been completed. You also need to drive cautiously for a day or two after you get your ride back for the seal to cling to the vehicle’s frame properly.
If you frequently travel on uneven roads, try to locate some other routes for a few days. It is best to slow down to a crawl before passing over potholes or speed bumps. The cure of the sealant may be hampered by driving on roads that vibrate a lot or by applying great force when hitting bumps and holes. If it occurs, there may be leaks or glass breakage.
2 . Reduce possible stressors
The adhesive’s ability to set can be hampered by a variety of factors, including pressure, direct sunshine, strong winds, rain, and extremely high or low temperatures.
Stay away from the following potential stressors for at least 24 to 48 hours following your windshield replacement to offer your windshield replacement Sand Springs the best chance of sealing correctly.
- Placing objects on the glass.
After installation, leave your car’s dash clear and uncluttered for at least a day, and don’t use any external coverings. Anything leaning against the window as the seal cures is not what you want.
- Parking under the sun.
Choose a shaded area and park there if you can. Use at least sun protection if you have to park outside in the sun on a sunny day.
- Vehicle wash
When the molding around your new windshield is still wet, high-pressure water jets might harm it. You should wait to power wash or take your car to a car wash for at least two days following installation. If you really must wash your car, use an ordinary garden hose.  Â
- Driving amid a lot of rain.
Avoid driving if at all possible during the first few days following your windshield replacement if the weather is exceptionally poor. Prolonged or intense precipitation may impede the adhesive’s ability to seal.
3 . At least an hour to settle
Your car should get at least an hour following the technicians’ windshield replacement to give the glass adhesive time to solidify and dry. To avoid the adhesive’s ability to settle being hampered by weather, debris, road vibrations, or other issues, avoid driving the car during this time.
4 . Give the retention tape a break.
You’ll find retention tape around the windshield’s margins when you get your car back. Do not remove that tape, even though it may not be your favorite thing to look at.
The purpose of retention tape is to keep debris out of the vicinity of the windshield seal. Removing it significantly raises the possibility of debris interfering with the curing process of the seal. In the end, even a tiny bit of debris can compromise your safety by compromising the integrity of the windshield’s seal.
5 . Keep the window open.
Air pressure might build up within your car’s cabin if you leave it parked outside during a hot day when your windshield is being replaced. If the interior of your garage gets heated enough, pressure might still build up when you park inside.
The temperature inside a car rises by about 43–48 degrees over the outside temperature after just one hour of sitting in a hot place. The interior of your parked car can reach an incredible 138° F in just 90 minutes if the outside temperature is 90° F.
The seal that connects the windshield to the vehicle’s frame may be compromised by the pressure exerted on it. All you have to do is leave one of the side windows slightly cracked to prevent pressure buildup. This will enable the adhesive to cure correctly and assist balance the temperature inside and outside of your automobile or truck.
Final thought
Do you require a new windshield? Allow windshield replacement Sand Springs to assist you! Our crew has over a decade of experience in glass installation and repair, and the respective auto glass safety standards have qualified our installers. For your convenience, we offer several sites across the metro area and your total pleasure is our priority. Call us or visit us on our website to get started. Have inquiries never hesitate to reach us. Please message us, and we will get back to you!
